1 WEATHER STATION Instruction Manual INVENTORY OF CONTENTS 1. Wireless Temperature Station 2. Wireless Temperature Sensor (TX40U-IT)
10 * When the outdoor signal is successfully received by the weather station, this icon will be switched on. (If not successful, the icon will not b
11 To set the time format in 12h or 24h display: 1. “12h” or “24h” will flash. (default 12h) 2. Press the + key to select the “12h” or “24h” displa
12 1. The year will flash. 2. Use the + key to set the year (between year 2011-2039). Default setting: 2011. 3. Press the SET key again to
13 The default temperature display is set to °F (degree Fahrenheit). To select °C (degree Celsius): 1. The “°F or C” will flash. 2. Use the + key
14 For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the i
15 If the weather station is moved to another location significantly higher or lower than its initial standing point (for example from the ground flo
16 INDOOR MIN/MAX TEMPERATURE RECORDS The current indoor temperature is displayed on the third section of the LCD. 1. Press and release the I
17 1. Press and release the OUTDOOR key repeatedly, the current outdoor temperature will alternate between the MIN/MAX temperature recordings and th
18 Note: When the 915 MHz signal is received correctly, do not re-open the battery cover of either the transmitter or weather station, as the batteri
19 To wall mount Before wall mounting, please check that the outdoor temperature value can be received from the desired locations. 1. Fix a screw (n
2 LCD display FEATURES: The Weather Station 12/24 hour display Calendar (year, month and day display in setting mode only) Tempe
20 To wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature sensor onto the br
21 When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings.
22 Indoor temperature checking interval : every 16 seconds Outdoor temperature reception : every 4 seconds Power consumption: Weather s
23 presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Tec
24 than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of
25 Contact info for warranty or technical support: La Crosse Technology 2817 Losey Blvd. S. La Crosse, WI 54601 Product Info and Support: www.l
26 FCC ID: OMO-TX38U + TX40U (transmitter) FCC DISCLAIMER RF Exposure mobile: The internal / external antennas used for this mobile transmitter mu
27 a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wit
3 Manual reset of MIN/MAX records 3 weather forecast icons with weather tendency indicator Wireless transmission at 915 MHz Signal recept
4 SET UP: Note: This weather station receives only one outdoor transmitter. Do not mix old and new batteries. Do not mix alkaline, standard, or re
5 HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION The weather station uses 2 x AA, IEC LR6, 1.5V batteries. When batteries need to be r
6 The temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries, please follow the steps below: 1. Remove
7 FUNCTION KEYS: Weather station: The weather station has four easy to use function keys. SET key INDOOR/RESET key + key OUTDOOR key
8 SET key Press and hold to enter manual setting modes: 12/24 hour time, manual time, calendar, ºF/ºC temperature unit setting + key To ch
9 Outdoor reception Signal icon * LCD SCREEN: Indoor temperature in °F/ºC Outdoor temperature in °F/ºC Weather tendency indicator Low battery in
Comentarios a estos manuales